|
TINALab II High Speed
Multifunction PC Instrument
With TINALab II you can turn your laptop or
desktop computer into a powerful, multifunction test and
measurement instrument. Whichever instrument you need
multimeter, oscilloscope, spectrum analyzer, logic
analyzer, arbitrary waveform generator, or digital signal
generator it is at your fingertips with a click of the
mouse. In addition TINALab II can be used with the TINA circuit simulation program
for comparison of simulation and measurements as a unique
tool for circuit development, troubleshooting, and the
study of analog and digital electronics.
More
information
TINALab II High Speed
Multifunction PC Instrument
TINALab II includes
a DC to 50MHz bandwith, 10/12 bit resolution, dual-channel
Digital Storage Oscilloscope. Due to its advanced
equivalent-time sampling technology,
TINALab can
acquire any repetitive signal with up to 4GS/s equivalent
sampling rate, while in single shot mode the sampling rate
is 20 MS/s. The full scale input range is ?00V, with 5mV
to 100V/div ranges.
The synthesized Function
Generator provides sine, square, ramp, triangle and
arbitrary waveforms from DC to 4MHz, with logarithmic and
linear sweep, and modulation up to 10V peak to peak.
Arbitrary waveforms can be programmed via the high level,
easy to use language of TINA's Interpreter.
Working automatically in conjunction with the
Function Generator, the Signal Analyzer measures and
displays Bode amplitude and phase diagrams, Nyquist
diagrams, and also works as Spectrum Analyzer.
Digital I/O for the high-tech Digital Signal
Generator and Logic Analyzer instruments allow fast
16-channel digital testing up to 40MHz.
The
optional Multimeter for TINALab II allows DC/AC
measurements in ranges from 1mV to 400V and 100 킕 to 2A.
It can also measure DC resistance in ranges from 1W
to 10MW.
Using TINALab II with TINA gives you the unique
capability to have circuit simulation and real time
measurements in the same integrated environment. This
provides an invaluable tool for troubleshooting and brings
your designs to life by comparing simulated and measured
results.
You can also plug Experimenter Modules
into the slot on the front of TINALab II, allowing you to
simulate, measure, and troubleshoot virtually the whole
range of analog and digital electronics.
Real-time Storage
Oscilloscope
Observe the
actual time response of your circuit. Set up the Function
Generator for waveform, amplitude, and frequency, drive
the test circuit, and see the real-time response along
with thevirtual response of the simulated
circuit.
Real-time Signal
Analyzer
Measure the
frequency response of your circuit in real-time.
TINALab's Function Generator will generate a real
swept-sine signal, capture the response, and display it on
the Signal Analyzer, where it can be compared to the
virtual (simulated) measurements.
Real-time Logic
Analyzer
Set up the test
stimulus for your logic circuit with the Digital Signal
Generator and see eight channels of your circuit's
real-time digital response on the Logic
Analyzer.
|
